Speed USB Flash Disk With NTFS Format

On the hard disk, there are two file formats that the system most commonly used, especially if the operating system installed Microsoft Windows based. The file system is NTFS and FAT or FAT32. The file system is of course also be used for USB flash disk. Format NTFS file system has advantages compared with the FAT or FAT32 system, for example:
  • NTFS I have a transfer speed higher
  • Having the drive features compression
  • An error correction is better
  • An encryption facility
However, some of the benefits of NTFS over shortages have also created a format that is not universal. Only the Windows NT-based Linux distribution and a few who are able to read NTFS format. But this deficiency can also be reduced by the install program to read the file system.

The use of NTFS file system for flash disk can be a little damp to help you copied the file, read and write speed, and more. However, as we also know, without the right driver flash disk you will not be able to read the operating system Windows 98 or ME.
If you are interested in a USB flash disk so that you can work more optimally, the following steps to format your flash disk in the partition to NTFS.

  1. Your flash disk have inserted in the USB slot, If you want to do re-format, used to backup data you have in your flash disk.

  2. Log in to Device Manager in a way click start>>Settings>>Control Panel and select System>>Hardware>>Device Manager. Remember! for this you must have administrator rights in the system is operating.

  3. Log in to [Device Manager] in a way click [start]> [Settings]> [Control Panel] and select [System]> [Hardware]> [Device Manager]. Remember! for this you must have administrator rights in the system is operating.

  4. computer tips
  5. Click on the disk drive. You will see that your USB flash disk already have listings on the disk drive.

  6. computer tips, device manajer
  7. Next, double click on the USB flash disk or right click and select Properties.

  8. falsh disk with NTFS format
  9. Select Police and then change Optimized for quick removal to be Optimized for performance. after that click Ok.

  10. flash diskNTFS format
  11. Then go back to Windows Explorer. Right click on your flash disk and select format.


After all the above step is completed the System NTFS can be selected. You can also use the allocation of 512 bytes.
speed usb flashdisk with NTFS format
speed usb flashdisk with NTFS format
Please note that if you want to pull out your USB flash disk, you first must click on the safely remove hardware on the task bar at the right corner, if not the physical damage or software inevitable.

If you find that you can not stopped your USB flash disk, so first you must click on the drive on explorer, stop all programs and associated viewer or a file is being run with the flash disk, and after that can be stop. If you find that your flash disk can not be in the format in NTFS after the steps above it is likely your flash disk does not support NTFS.



Turn Off The USB Connection Port

Turn Off The USB Connection Port :

If you wish that people did not recklessly store data on USB drivesto a PC or Notebook, I have the right way. Turn off all the connection through the USB port registry editor. Click Start>> Run>> Type regedit, and then click [OK]. Next, browse the folder:
HKEY_LOKAL_MACHINE \ \ SYSTEM \ \ Current Control Set \ \ Services \ \ USBSTOR. Double-click [Start] and then type the value 4. To return again, to change the value of 3.
turn off USB


How To Turn Off Autorun

How to turn off autorun on windows Xp I found from Kasimbu. Here I just want to clarify the picture again with the help. As we know if autorun is active in our computer so when we enter the data from the flash disk with the virus, our computer automatically direct infected with the virus also. Therefore, to prevent it then we have to turn off autorun first.
  1. The first you have to do is click Start>> Run>> Gpedit.msc

  2. How To Turn OFf Autorun
  3. In the group policy window, please click computer configuration>> Administrative
    How To Turn OFf Autorun
  4. Appear Turn Off Autoplay menu Properties>> select enable>>all drives>>ok.

  5. How To Turn OFf Autorun
  6. Repeat the process of number 2 above for the User Configuration>> Administrative Templates>> System




Restore A File That Is Hidden In The Flash Disk

How to restore a file that is hidden in the flash disk:
  • You must first turn off anti-virus is active on your computer.

  • Second, click the Start menu on your toolbar>> RUN>> Type cmd (command promt)>> Ok.

  • After entering in the dialog box menu Command Promt, Please type attrib(space)-s(space)-h(space)f:*.*(spaces)/s(space)/d

  • Further details,attrib -s -h f: *.* /s /d
Description:
* Attrib = attribute
* -s = function so that the file again recognized by windows
* -h = function display the hidden files again.
* f = Please change the location of the flash disk in the disk
* /s and /d = attrib command will apply to all files and folders in the folder

A Quick Way To Open Windows Explorer

open windows explorer, storage tips

May be stale, if you already know this, please close this page. I will give tips to you a quick way to open windows explorer at the time of stand by in the desktop. Please press the button at the same time the windows logo button E on the keyboard.